Wood Glue Key Features

• Moderate viscosity ensures easy spreadability while preventing excessive penetration.
• High bonding strength and reliable performance.
• Comes with premium water resistance up to D3 or D4 grade.
• Moderate open time for convenient clamping and friendly operation.

Appearance

Milk white Mucus no obvious granule.

Specification

MPF104: 20kg/pc

Viscosity: ca. 5500 mPa.s | pH: ca. 3 | Minimum Film Forming Temperature: Approx 8°C | High Temperature Stability: Stable after 1 week storage under 50°C

Advantages

• Excellent rate of bond strength development.
• D4 water resistance, suitable for constant water immersion.
• Available for interior and exterior application.
• Low timber staining characteristics.
• Water based formula for easy clean up.
• Compatible with radio frequency cure processing.

Scope of Application( Typical Solid Content: 20% - 35%)

1. Paper and Packaging Industry: Mainly used in pasting, carton forming, low-grade paper tube winding, book binding, and craft making where high water resistance and strength are not critical.
2. Primary Processing and Temporary Fixing: Suitable for initial positioning or temporary bonding in furniture production.
3. Porous Material Bonding: Due to its good penetration, it can be used for bonding porous materials with low surface requirements.

Wood Glue Core Applications

1. Furniture Manufacturing: Joining mortise and tenon structures, panel splicing, laminated board pressing, etc.
2. Indoor Woodworking: Door and window production, staircase installation, cabinet assembly, etc.
3. Wood Crafting: The preferred choice for both amateur woodworking enthusiasts and professional artisans.
4. Some Building Material Processing: Such as bonding substrate materials for composite flooring.

Using Method

1. The joint surface must be clean and dry.
2. Apply adhesive, press parts together until set, and allow 24 hours at room temperature to achieve full strength.

Important Usage Instructions & Warnings

• 1 Do not use iron containers for packaging.
• 2 Temperature Control: Use and apply at 10°C or above. After application, the bonded product must also be kept at 10°C or above until fully cured. Low temperatures may prevent proper film formation, resulting in reduced bond strength.
• 3 Storage: After use, wipe the bottle mouth clean and seal tightly to preserve for future use.
• 4 If Partial Coagulation Occurs: If the glue shows signs of partial coagulation, mix thoroughly until uniform. This will not affect its adhesive properties.
• 5 Wood Moisture Content: For optimal bonding, wood moisture content should be maintained between 8% to 15%. Values outside this range may compromise bond quality.
• 6 Safety Precautions: Do not ingest. Keep out of reach of children.